Duoflam S17/3 32 Jet Chip Range & Fish Fryer Burner – Natural Gas – 17"

Duoflam S17/3 32 Jet Chip Range & Fish Fryer Burner – Natural Gas

Commercial 32-jet Natural Gas replacement burner for traditional fish & chip ranges, chip fryers, deep-pan fryers and other compatible commercial catering equipment.

This is the Duoflam S17/3, also referenced as S17-3 or S17-3NG. It is the larger 17-inch, 3-leg burner fitted with 32 Natural Gas burner jets and a 3/4" BSP female bottom-entry gas connection.

If you are replacing an existing burner, we recommend identifying it by the jet count, overall dimensions, inlet position, gas type and S17/3 reference rather than relying solely on the make of the complete fryer or chip range.

Burner Specification

• Manufacturer / Type: Duoflam
• Model: S17/3
• Alternative Reference: S17-3 / S17-3NG
• Gas Type: Natural Gas
• Number of Jets: 32
• Jet Type: N64 Natural Gas Jets
• Overall Size: Approx. 17" x 7½"
• Burner Configuration: 3-Leg Rectangular Multi-Jet Burner
• Gas Inlet: 3/4" BSP Female
• Inlet Position: Bottom Entry
• Heat Output: Approx. 147,000 BTU/hr
• BES Cross Reference: 9397
• Condition: Brand New

Suitable Applications

The S17/3 Natural Gas burner is commonly used as a replacement burner in commercial catering and frying equipment including:

• Fish & Chip Shop Frying Ranges
• Traditional Chip Ranges
• Commercial Fish Fryers
• Deep-Pan Gas Fryers
• Commercial Frying Ranges
• Commercial Hot-Plate Cooking Ranges
• Certain Chinese Commercial Cookers
• Other Catering Equipment Using an S17/3 32-Jet Natural Gas Burner

Duoflam S-series burners have been used in traditional jet-burner style commercial frying ranges. As many older frying ranges were manufactured in different configurations, compatibility should always be confirmed by comparing the existing burner specification rather than relying on appliance brand alone.

Is This the Correct Burner for My Fryer?

Before ordering, compare your existing burner with the following identifying features:

• 32 individual burner jets
• Approx. 17" overall length
• Approx. 7½" overall width
• Three-leg rectangular burner design
• 3/4" BSP female bottom-entry gas connection
• Natural Gas version
• S17/3, S17-3 or S17-3NG reference where marked

If your existing burner matches these specifications, this is the common S17/3 32-jet Natural Gas chip-range burner.

Not Sure Which Burner You Need?

If you are unsure which burner you require, send us:

• A clear photograph of the existing burner
• Overall length and width
• Number of burner jets
• Gas type
• Gas inlet size and position
• A photograph of the appliance data plate where available

We can then help identify the closest replacement before you order.

Part Numbers & Cross References

• S17/3
• S17-3
• S17-3NG
• BES 9397
• 32 Jet Chip Range Burner
• 32 Jet Fish Fryer Burner
• 17 Inch Chip Range Burner

What's Included?

• 1 x Duoflam S17/3 Burner Body
• 32 x Natural Gas Burner Jets – Pre-Fitted

Please note: Gas valves, pipework, pilot assemblies, regulators and other installation components are not included unless specifically stated.

Replacement Natural Gas Jets Available

Individual replacement Natural Gas jets for compatible Duoflam multi-jet burners are also available separately from Tezla Gas Products.

If your existing burner body is still serviceable but individual jets are damaged, blocked or require replacement, please contact us with the burner reference and existing jet markings.

Important Installation Information

This is a commercial gas component and must be correctly matched to the appliance, gas type, operating pressure and required heat input.

Installation, replacement, adjustment and commissioning of commercial gas equipment must be carried out by a suitably qualified Gas Safe registered engineer holding the appropriate commercial catering qualifications.

The complete appliance must be checked for correct gas pressure, heat input, combustion, flame condition, ventilation and safe operation before use.