Duoflam S17/3 32 Jet Chip Range & Fish Fryer Burner – LPG – 17"

Duoflam S17/3 32 Jet Chip Range & Fish Fryer Burner – LPG

Heavy-duty 32 jet Duoflam S17/3 LPG gas burner designed as a replacement burner for commercial fish & chip ranges, chip fryers, deep-pan fryers, hot-plate cooking ranges and other compatible commercial catering equipment.

This is the larger 17-inch, 3-leg S17/3 burner, fitted with 32 calibrated LPG jets and featuring a 3/4" BSP female bottom-entry gas connection.

These burners are commonly identified by their size, jet count, inlet connection and S17/3 reference rather than by the make or model of the complete frying range. Please compare the specifications below with your existing burner before ordering.

---

Key Features

• Model / Reference: S17/3 / S17-3
• Gas Type: LPG
• Number of Jets: 32
• Burner Size: Approx. 17" x 7½"
• Configuration: 3-leg rectangular multi-jet burner
• Gas Inlet: 3/4" BSP Female – Bottom Entry
• Heat Output: Approx. 112,000 BTU/hr
• Construction: Heavy-duty burner body with calibrated brass LPG jets
• Condition: Brand New

---

Suitable Applications

The S17/3 is a high-output commercial multi-jet burner commonly used for:

• Fish & Chip Shop Frying Ranges
• Traditional Chip Ranges
• Commercial Fish Fryers
• Deep-Pan Fryers
• Commercial Hot-Plate Cooking Ranges
• Certain Chinese Commercial Cookers
• Other Catering Equipment Using an S17/3 32-Jet Burner

Duoflam S-series burners have also been used in traditional jet-burner style commercial frying ranges. As many older frying ranges were manufactured in different configurations, compatibility should always be confirmed by comparing the existing burner rather than relying on the appliance brand alone.

---

Is This the Correct Burner for My Fryer?

Before ordering, compare your existing burner with the following identifying features:

• 32 jets
• Approx. 17" long x 7½" wide
• 3-leg rectangular burner design
• 3/4" BSP female bottom-entry gas inlet
• LPG gas version
• S17/3 or S17-3 reference, where marked

If your existing burner matches these specifications, this is the common S17/3 32-jet chip-range burner.

Not sure which burner you need?
Send us a clear photograph of your existing burner along with its overall length, width, jet count, gas type and appliance data plate details and we can help you identify the correct replacement.

---

Part Numbers & Cross References

• Duoflam Reference: S17/3
• Alternative Reference: S17-3
• LPG Reference: S17-3LPG
• BES Cross Reference: 9398
• Type: 32 Jet Chip Range Burner

These references are useful when replacing an existing burner or comparing against an old catering equipment parts list.

---

What's Included?

• 1 x Duoflam S17/3 Burner Body
• 32 x LPG Burner Jets – Pre-Fitted

Please note: Gas regulator, gas hose, pipework, valves, pilot assembly and other installation fittings are not included unless specifically shown or stated.

---

Replacement Jets Available

Replacement LPG jets for compatible Duoflam multi-jet burners are also available separately from Tezla Gas Products.

If your existing burner body is still serviceable but individual jets are damaged, blocked or require replacement, please contact us with the burner reference and gas type.

---

Important Installation Information

This is a commercial gas component. The burner must be correctly matched to the appliance, gas type, operating pressure and required heat input.

Installation, commissioning and any alteration to commercial gas equipment must be carried out by a suitably qualified Gas Safe registered engineer with the appropriate commercial catering and LPG qualifications.

The installer must confirm correct gas pressure, heat input, combustion, flame condition and safe operation of the complete appliance before use.